The AP HUS Head-Up Screen     -     The AP Rechargeable Battery Pack     -     The AP 3M SMBCi

Introducing the AP HUS - Head-Up-Screen

Hands-free monitoring of rebreather status throughout the dive
 

The HUS is a near-eye secondary display communicating real-time rebreather and dive computer information

• Vivid OLED colour display - with excellent readability even in very poor viz
• Conditional colouring indicates status changes - Green = good, Yellow = info alert, Red = warning
• New Ascent Rate and Ceiling Height graphical displays
• Live information in-line-of-sight throughout the dive
• Super adjustable articulated mount allows positional preference
• Upgrade path for all AP rebreathers with Vision electronics
• Ideal for photographers, film-makers or anyone preferring hands-free monitoring
• CE Approved

Introducing the AP Rechargeable Battery Pack

The rechargeable, intelligent, dual power system almost doubles the capacity of regular batteries, is rapidly recharged and includes a full set of international power adaptors

The AP Rechargeable Battery Pack incorporates two separate, large capacity, power supplies - B1 & B2 - hardwired to the rebreather controllers and supplied with a universal charger compatible worldwide

• Batteries B1 & B2 are physically and electrically isolated
• Approx. double the capacity of existing batteries - only requiring a recharge every 15-27 hours of diving (varies depending on solenoid type, work-rate, temperature & backlight use)
• Intelligent dual power system with all the usual AP checks, warnings, displays and automatic switch-over to B2 on depletion of B1
• Hardwired to the rebreather controllers, factory fitted and encapsulated to ensure a waterproof, uninterrupted power supply
• Rechargeable from the mains power supply (100-240V) or 12 volt DC car or boat supply
• Unique rapid charger - charging both batteries in approx. 4 hours from empty to maximum charge - resorts to a trickle on completion
• Intelligent protection circuitry during use and charging 
• Waterproof screw-on cap for charging port
• More convenient in remote locations
• Deactivation clip for transportation and safe-guard against accidental switch-on
• For all AP rebreathers with Vision - as an upgrade to existing units or standard on new units from November 2014 onwards
• CE Approved

Introducing the AP 3M SMBCi

Extra long, self-sealing Surface Marker Buoy with Easifil inflator stem - designed for maximum visibility in difficult conditions
 

The AP 3m self-sealing SMB with Easifil inflator stem provides extra visibility in the open ocean and comes loaded with additional features

• More than double the length of a regular SMB
• Original AP self-sealing baffle - tried & tested design seals airtight on inflation
• Easy deployment and inflation - velcro release and inflated via Easifil stem
• Easifil inflator hose stem - allows easy snag-free inflation using your BC or dry-suit inflator hose
• Can also be filled with a regulator via bottom opening
• Brass trigger hook attachment - rolls into compact package for stowage
• Light-stick attachment pouch - at the top with tie-off loops
• Strobe attachment point - velcro loop at the top with tie-off loops
• Extendable loop at the bottom - up to 70cm long - allows the SMB to be pulled upright at the surface by inserting fin