We're ready for you!

After a record breaking month, our tactile stocks are now fully replenished and are ready to be shipped out to our customers all across the globe!

Tactile labels are used on a wide range of products from oven cleaners, bleach and detergents to hair dye, Tipp-ex and most recently electronic cigarette and e liquid refills.

Have you checked to make sure what your selling doesn't require one? If not - do it now or you could be in a lot of trouble!

Still not sure on what they are? Read on!

Our tactile label specification is as follows:

Complies with BE EN ISO 11683:1997 requirements.
Clear label with raised triangle (0.25mm or 250 Micron).

18mm sides on triangle.

25mm circle diameter.

1 lane per reel.

Rolls of 2500.

76mm cores.

Slack rewind.

Left hand edge leading.

Outside wound.

Markers on backing paper for auto application.

Over the last couple of months we have been bombarded with orders for these little labels - it seems that a lot of people are either having problems with the quality of their current stock or are just unable to get hold of any at all! Fortunately, we have been able to supply everybody with enough stock to keep them going while we replenished our own stockpile for the future. We now aim to stock a minimum of 1,000,000 tactile labels on the shelf at all times.

Since we started supplying our Tactile labels to the public "back in 2000" our product specification has never changed. This is because from the beginning we insisted on sourcing only the highest quality products, and unlike a lot of cheap imitations that fail inspection left right and centre our labels don't, and because they have not changed since day one, we know they are exactly what is required and you know you will be getting the best product, every time.

By law, any chemical sold to the public that is toxic, very toxic, corrosive, harmful, flammable (extremely & highly) as well as some aerosol dispensers that also carry these warnings must have a tactile warning label attached to it to alert the blind or partially sighted that they are handling a dangerous product.

Adding the label to existing products is a quick and easy job and your labels do not need to be redesigned. The easy-release backing material means the labels can be applied by hand or by using an applicator as the roll also contains a small black sensor mark to allow auto application.

These labels can be bought directly from the online shop but if you are looking to bulk buy (250,000+) then email us at sales@limpetlabels.co.uk and we will get back to you with our high volume rates.