View this email in your browser

Dear |NAME| :

Happy New Year! We wish you a healthy and prosperous year in 2016.
In the end of last year, we have been progressing in software development and maintenance, and are now ready for our next release. In summary of recent events, there has been extensive work done in CutPro for new features and bug fixes, and we have also started new versions of MALTF and MALDAQ.

www.malinc.com

CutPro 11.1 - Primary Release Contents

Receptance Coupling - Generate tooltip FRFs without tap tests
Report Tool: Generates a (*.PDF) or (*.RTF) simulation report instantly.
Bug Fixes: Several bugs have been fixed.

Update Your License

Receptance coupling allows the user to perform less tap-test measurements, and determine the predicted FRF of a cutting tool & holder at its tip for a specific machine tool.

How it works
This is done by measuring the machine's spindle FRF using a holder, and subtracting that holder from the tap-test measurement. We are then able to create predicted tooltip FRFs by inputting holder geometry and tool geometry, along with their material properties, and coupling them to the spindle FRF. We will add more features to this tool as CutPro progresses.

The report generator allows the user to create a paper-format report with any workspace in any language at the click of a button.

How it works
Once the workspace with results is saved, the Report Generator will grab information from the project tree along with data (i.e. FRFs) and create a CutPro themed report. All simulations must contain results for the report generator button to be available.

Update Your License

ChatterPro Mobile (Android) allows the user to potentially detect chatter vibrations during machining using your smartphone device.

How it works
Enter your spindle speed and number of flutes, and hold your phone close to the machining zone. ChatterPro will detect frequencies that do not correspond to machining (noise), and will suggest new speeds to eliminate those vibrations.

Toolboxes can now be added to CutPro. The Machining Wizard and Threading Toolbox programs are made in Matlab and are works in progress. Please contact us if you are interested in these free additions to CutPro. These toolboxes are not downloadable via CutPro updates.

IMTS 2016 is one of the largest industrial trade shows in the world, and will be held in Chicago from Sept 12-17, 2016. For the very first time, MAL will feature a private booth. We encourage those attending this trade show to organize meetings with us. Visit us at Booth E5917

Click here to organize a meeting at IMTS 2016.

The Tap Testing (MALTF) and Data Acquisition (MALDAQ) CutPro modules are currently being updated with a user interface redesign to mimic CutPro 11. This design decision will provide the customer ease of use, as all modules of CutPro will be styled the same. Both modules will contain new features, and workspaces will be based on a project tree layout.

Visit our website to watch short video manuals on impact testing, equipment setup and installation, modal parameters identification, process simulation and proper cutting conditions selection. A video introduction to NPro CADCAM Plugin is also available. To request a quote or an online demo version, please visit our website or use the navigation buttons below.

MORE INFORMATION

Software

Get Quote

Services

Get Support

Scholarship

My Account

YouTube

Facebook

Twitter

THIS EMAIL MESSAGE WAS SENT TO YOU BECAUSE YOU HAVE DEMONSTRATED AN INTEREST IN LEARNING THE LATEST MALINC NEWS. PLEASE DO NOT REPLY TO THIS EMAIL.

unsubscribe from this list update subscription preferences privacy contact us

Dear *|NAME|* :

Dear |NAME| :