|
|
|
|
Clay-Bond Plus
Soldering Made Simple!
Save time and money today when you give Clay-Bond Plus the chance to show you how easy it is to join creations and findings of silver, bronze, brass and copper, and any combination thereof, without a torch or soldering iron! SAVE 20% NOW...
|
|
Save BIG Now...
Now through Labor Day... Save 20%...
- Clay-Bond Plus 5 gm regularly $21.95 - NOW $17.50
- Clay-Bond Plus 10 gm regularly $31.95 - NOW $25.50
These are serious savings and are being offered so you can try Clay-Bond Plus and prove to YOURSELF how easy it is to join creative elements and to make repairs to your metal clay creations.
|
|
|
Advantages of Clay-Bond Plusâ„¢ over conventional solder pastes include:
- Firing can be done in a kiln, so a torch and open flame are not required. Skill in soldering is not necessary.
- It contains a binder that dries and holds the two pieces together before and during firing, so maintaining precise alignment of the pieces is easier than with solder paste.
- It will not spread beyond the join and wet surrounding metal if fired properly.
- When used to join sterling silver, it is impossible for fire scale to form on the sterling.
|
|
|
Clay-Bond Plus is a silver-containing solder used to join fine silver, sterling silver, bronze, copper, and brass articles. No torch or soldering iron is required. It works well in joining articles made from BRONZclayâ„¢, COPPRclayâ„¢, Argentiumâ„¢, and most all other brands of metal clay alloys to each other. It is a powder that is mixed into a paste with water and then applied to the surfaces to be joined. After firing it forms a strong metallic joint suitable for all jewelry-related applications.
|
|
An Alternative to Solder
by Jennifer Gastelum
|
|
Earrings Made Easy...
Delicate ear posts can be easily attached to your earring creations using Clay-Bond Plus. The post with solder pad used for the samples can be ordered HERE.
|
|
Just to push the envelope on what Clay-Bond Plus can do, the left and middle sample shape have ear posts WITHOUT a pad can be securely attached to little creations. First, you create a shallow dimple at the point of attachment, apply a bit of Clay-Bond Plus to the dimple, prop the ear post in the vertical position, apply a bit more Clay-Bond Plus and let dry completely. Handle carefully. Once fired the posts will be bonded securely to the small creation. Be sure and read the complete instructions for use.
|
|
|
Left: Fast Fire Bronze, sterling post, no pad... Center: PMC3, sterling post, no pad... Right: PMC3, sterling post with pad
|
|
|
|
|
|
|
|
|
|
|
