Ingate Systems was recognized in Swedish Dagens Industri at this years Di Gasell business growth awards, in which Dagens Industri profiled established companies that at least doubled their growth for the past four years, and at the same time had organic growth and healthy finances. The list is published in theDecember Issue of Dagens Industri.
The Only SBC You Need: Ingate’s SIParator®,
the Real Time Session Firewall and Router - an SBC RTS-FW
The Most Versatile, Powerful and Cost-Effective SBC
Ingate’s SIParators® are more than other SBC’s and fill a number of functions and sometimes replace several SBC’s with just one SIParator. The most important example is carriers’ SIP trunking offerings now that the copper (ISDN/PRI) network is being closed.
Other SBCs are either E-SBCs (Enterprise Session Border Controllers) OR used to protect the carrier’s SIP core. The Ingate SIParator fills both functions and replaces both with a single Real-Time Session Firewall (RTS-FW) SBC.
Ingate’s SIParator SBC RTS-FW On-Premise, in Private or Public Cloud
An E-SBC is typically deployed on-premise, but with private “level 2 access” (VLAN, VPN, MPLS or "business port" on the CPE etc.) to the enterprise VoIP/UC LAN, this demarcation point can now be moved to the cloud using Ingate’s SIParator. Select which is best in each case (public or private cloud or on-premise). All Ingate solutions directly support the large mission-critical PBX installations using Avaya, Mitel, Cisco and ALE (Alcatel) which are mostly still copper connected, so carriers can offer their SIP trunking services without requiring the PBX vendor’s own (very expensive) E-SBCs.
Delivering SIP-based telephony/UC from the carriers’ SIP core directly to the IP-PBX and UC solution at the enterprise LAN is highly valuable for carriers now closing their copper (ISDN) networks.
Special Offer: Upgrade Your Customers’ SIParator Hardware
As a service to our customers, Ingate Systems is pleased to offer a limited‐time promotion to replace the older midrange hardware models with the current Ingate SIParator/Firewall S52. The old Ingate SIParator models 50/55/65 that were last sold seven years ago, are no longer covered by warranty and the compatibility with new software releases is not guaranteed. The Ingate SIParator models 51/56/66 were superseded by the SIParator 52 in 2015 and will reach their end of life status in 2018.
Upgrading these units now will make sure your customers have the most modern hardware with expanded capacity, our most current software and are covered by hardware warranty for up to 5 years. Contact sales@ingate.com and we will contact you with all details around this limited‐time offer, which will be in effect until February 28, 2018.
New SIParator® Software Release 6.0.3 – Download Now
Release 6.0.3 of the Ingate SIParator®/Firewall is now available and continues Ingate’s commitment to improving its products’ security and stability.
Upgrading from 5.0.X to release 6.0.X of the Ingate SIParator®/Firewall is major and adds very useful enhancements, including new functions and features described in the July newsletter such as:
Release 6.0.X made Ingate SIParator® ideal for the largest cloud services
Version 6.0.X of Ingate’s SIParator® / Firewall further strengthened the already-powerful firewall data and SIP security protection capabilities, especially for large cloud SIP and WebRTC services where TLS and WSS signaling are used and made Ingate’s SIParator ideal for the largest cloud services.
Strengthened firewall and SIP routing security
A magnitude increase in protection and privacy of SIP and WebRTC signaling, combined with up to 20,000 media sessions or 10,000 WebRTC – SIP converting media sessions for large cloud SIP and WebRTC services where TLS and WSS signaling are used, including novel CPU saturation protection, multi-core SSL initialization offload, brute force SIP authentication protection active in SIP proxy pass-through mode, enhanced SIP IDS/IPS protection, installed and customer-extendable rule packs and SIP signaling rate limiting in two levels.
General and full IPv6 support
Full IPv6 support, for SIP and other functions, including VPN and general firewall functions. SIP signaling passing the SIParator SIP proxy can independently use IPv4 or IPv6 as needed for all SIP transports: UDP, TCP, TLS, WS and WSS.
ICE and WebRTC support added
WebSockets and WebSockets Secure WS/WSS are supported for SIP transport allowing WebRTC browser-based SIP clients and the typically open ports 80 for HTTP and 443 for HTTPS to be used. Also, a general high-capacity media proxy supporting transcoding of WebRTC-type of media (DTLS-SRTP) to SIP-type of media (RTP/SRTP), using ICE or not, and RTCP-MUX termination are supported.
For more information on the 6.0.3 release, please view the release notes.
Details of the major enhancements when upgrading from 5.0.X are described in release notes 6.0.1. Log in and download the latest software here.
Try out our Ingate SIParator/Firewall E-SBC, including SIP and SIP trunking features, free for 30 days. Ingate products enable SIP trunking in a matter of minutes. Click here to start your trial or click here to get in touch with your local reseller now. Contact sales@ingate.com if your application is on a Amazon (AWS), Google Cloud, Microsoft Azure or OpenStack (NFV) cloud.
Ingate’s mission is to enable the best access for telephony, global real-time
and unified person-to-person communication for everyone.
