SPECIALIST WORK
TVR Cerbra Race car rear diffuser:

A Gentleman racer approached us to fit a universal Reverie rear diffuser 270/630/270mm (add links) to his TVR race car, allowing him to shortly re root his exhaust system and make up a full flat floor to improve downforce and reduce drag, this making the car more competitive on circuits.
The Fitting work also involved extensively cutting out and modifying the GRP boot floor, to allow the diffuser to be installed at 7 degrees exit angle to the future floor install.

View our range of diffusers

 
 

Hiyabusa Gen II Air Boxes

We have had some increased demand for the new season with people getting new car builds ready wanting to pass UK drive by noise circuit limits, therefore needing air boxes and intake silencer systems for cars with throttle bodies
We have a huge range of universal fitment and application specific air boxes, all on our web site and always happy to help advise.

View our range of Hiyabusa air boxes




Allumy Motorsport Caterham Hiyabusa with 620 Nose

A Specially modified Hockenheim 422 air box with 2 off 75mm oval side intake snorkels (Under the bonnet line) and then a modified by Reverie Caterham 620 nose cone with 2 off 75mm straight oval snorkel exits to provide cold, quiet ram air.
The Box top will come just through the bonnet via a nice neat cut out to give plenty of air box volume;




PARTS USED IN THE KIT ABOVE;

Reverie Hockenheim 422 air box (R01SE0033)
105 x 38mm Oval air duct (R01SE0249)
75mm 45deg air duct (R01SE0266)

NEW PRODUCTS!

CSR 260 Caterham rear diffuser R01SB0594

We now offer a pre-preg Autoclaved 3 tunnel rear diffuser for fitment to Caterhams CSR260, previously we only offered to SV and Std S3 chassis models.

Click link here for more info

  


Porsche 911 991 GT2RS Rear Wing and CNC High mounts

We now offer a 310mm 1700mm wide high down force rear wing profile to mount to Stock original equipment Porsche 911 991 GT2 mounts, or we can offer special “Club Sport style” High Mounts which bolt to the original boot lid and allow fitment of our adjustable 310mm High Down force rear wing.

View our GT2RS range on our website

View technical drawing of wing kit with higher mounts (R01SB0576)
View technical drawing of wing kit with standard OEM mounts (R01SB0577)



Wing kit part no.s R01SB0576 for high mounts (shown above), R01SB0577 for OEM std mounts



R01SB0578 (above, right) high mount
R01SB0579 (above, right) OEM std mount