PC Engines apu coreboot Open Source Firmware v4.11.0.5

• Rebased with official coreboot repository commit 90557f4.
• Fixed processors definitions and scope in ACPI. Partially fixed processor entries in ACPI previously caused issues with thermal sensors on OPNSense and now it is fixed.
• Northbridge interrupt controller was not being initialized in coreboot. Proper initialization routine has been added for this controller.
• Enabled PCIe power management capabilities: ASPM L0s and L1, CommonClock and ClockPowerManagement. This should result in lower power consumption of the apu devices. The measurements of the power consumption and comparison report how the changes affect the power consumption will be available soon.
• AGESA allows to reset the PCI Express endpoint during silicon initialization. Since apu2 has GPIOs connected to PCI Express reset signals, the reset logic has been implemented to reset single PCI Express devices. This should improve the detection of PCI Express modules. Test results of problematic modules and their detection will be published soon.
• Added thermal zone definition to ACPI in order for operating systems to automatically probe for thermal sensors on apu2 devices.
• Implemented SMBIOS memory tables for apu1.
• Added missing northbridge interrupt controller to MP table.

Community

Patches sent for review:

• drivers/pc80/tpm/tis.c: change the _HID and _CID for TPM2 device

Patches merged by community:

• mb/pcengines/*/devicetree: remove non-existing NCT5104d LDN 0xe
• nb/amd/{agesa,pi}/acpi: include thermal zone
• superio/nuvoton/nct5104d: add chip config option to reset GPIOs
• mb/pcengines/apu1/mainboard.c: Add SMBIOS type 16 and 17 entries
• nb/amd/pi/00730F01: initialize GNB IOAPIC
• nb/amd/pi/00730F01/state_machine.c: unhardcode IOAPIC2 address
• mb/pcengines/apu2/mptable.c: add GNB IOAPIC to MP Table
• mb/pcengines/apu2: add reset logic for PCIe slots
• mb/pcengines/apu2: enable PCIe power management features
• acpi: correct the processor devices scope
• amd/common/acpi: move thermal zone to common location
• nb/amd/agesa/family14: Improve HTC threshold handling
• mb/pcengines/apu2: do not pass enabled PCIe ClockPM to AGESA

Total:

• 492 lines added,
• 131 lines removed,

to official coreboot repository.

Statistics

The chart shows the total files changed from release tag against the rebase point of given release specified in CHANGELOG (CHANGELOG.md and gitlab-ci.yml excluded from statistics). Check the statistics with:

git diff --stat 90557f4 ':(exclude).gitlab-ci.yml' ':(exclude)CHANGELOG.md'

88 files changed, 2840 insertions(+), 166 deletions(-)

Testing

• PC Engines hardware configuration matrix - hardware configurations available for testing in 3mdeb laboratory.
• PC Engines release validation results - please note there are separate sheets for each board-release.

Aggregated test results

• Mainline:
  • PASSED: 433 (+0)
  • FAILED: 22 (+0)
  • PASSED [%]: 95.16 (+0%)

No particular changes in tests in this release. Regression didn't detect new bugs.

Current issues table

Download the latest firmware

1. Improve the support of TPM2 in coreboot and SeaBIOS. Currently there is only the TCPA (TPM1.2) log support in coreboot. Additionally SeaBIOS overwrites existing entries in TPM2 log area. cbmem utility also lacks support for displaying TPM2 log area.

   WORK IN PROGRESS

2. Reorganize runtime configuration by making it persistent across updates and accessible from user space. Also prepare a tool for offline binary modification.

   VERIFICATION

3. Vital Product Data (VPD) support. User will have possibility to store and change VPD configuration in Read-Write section of SPI flash. Moreover, default VPD keys and values will be stored in Read-Only region to protect data against corruption. Also, sortbootorder runtime configuration will be stored in VPD Read-Write section, so access to it will be possible in OS via dedicated util.

   VERIFICATION

4. ACPI Thermal Zones implementation. BSD systems suffer from lack of Thermal Zones and lack of temperature status on the dashboards of router distributions of BSD systems.

   DONE

Coming soon

Feature and improvements on the roadmap:

1. Improve the support of TPM2 in coreboot and SeaBIOS. Currently there is only the TCPA (TPM1.2) log support in coreboot. Additionally SeaBIOS overwrites existing entries in TPM2 log area. cbmem utility also lacks support for displaying TPM2 log area.
2. Reorganize runtime configuration by making it persistent across updates and accessible from user space. Also prepare a tool for offline binary modification.
3. Vital Product Data (VPD) support. User will have possibility to store and change VPD configuration in Read-Write section of SPI flash. Moreover, default VPD keys and values will be stored in Read-Only region to protect data against corruption. Also, sortbootorder runtime configuration will be stored in VPD Read-Write section, so access to it will be possible in OS via dedicated util.