Copy
View this email in your browser

Morserino-32 News


Hi <<First Name>>,

New Version 4.4 released

New features:

 

  • You can set the brightness of the display, by double-clicking the RED button. There are 5 levels of brightness. Each double-click reduces the brightness a bit, when the lowest level has been reached a double click resets the display to full brightness again.
  • There is a new option for the parameter „Key ext TX“ (Keyer&Gen.&RX) that allows the Morserino-32 in either LoRa or Internet transceiver mode to key a connected transmitter. This can be useful for remote control of a transmitter with the help of two Morserinos.
  • There is a new parameter, „Decoded on I/O“, that can be set to „On“ or „Off“ (which is the default): normally, decoded CW that comes from an external source (when using any of the transceiver modi, or using the decoder to decode audio input) is played on the speaker (or headphones), but not sent to the external audio I/O port. With this parameter set to „ON“, the audio is also sent to the external audio I/O port.

 

Improvement:

  • Using a straight key, you can now also start the sessions in Echo Trainer (and Generator) modes by pressing the straight key (so far you had to touch the capacitive paddles or use the black knob to start the session; these methods work as before, of course).



Vy 73

Willi
OE1WKL

Neue Version 4.4 freigegeben

Neue Features:

  • Die Helligkeit des Displays kann durch Doppelklicken der ROTEN Taste eingestellt werden. Es gibt 5 Stufen, jeder Doppelklick verringert die Helligkeit ein wenig. Ist man bei der niedrigsten Stufe, wird durch den Doppelklick wieder die größte Helligkeit eingestellt.
  • Es gibt eine neue Option für den Parameter „Key ext TX“ (Keyer&Gen.&RX), der es erlaubt, im LoRa oder Internet Transceiver modus einen angeschlossenen Sender zu tasten. Dies kann für die Fernsteuerung eines Transceivers (mithilfe zweier Morserinos) von Nutzen sein.
  • Es gibt einen neuen Parameter, „Decoded on I/O“, der auf "On" oder "Off" gestellt werden kann (normalerweise auf "Off"). Normalerweise wird dekodiertes CW einer externen Quelle (Transceiver Modus oder vom Audio Input dekodiert) zwar auf dem Lautsprecher bzw. Kopfhörer wiedergegeben, aber nicht am Audio Ausgang (Audio I/O). Ist dieser Parameter auf "On", wird dies auch über Audio I/O ausgegeben.

Verbesserung:

  • Wenn man eine Handtaste benutzt, kann man die Sessions im CW Generator und im Echo Trainer Modus auch mit dem Drücken der Handtaste starten (bisher konnte man dies nur über ein Paddle, bzw. über den schwarzen Knopf tun - diese Methoden funktioneiren natürlich auch weiterhin.

Vy 73
Willi
OE1WKL
Copyright © 2022 morserino team, All rights reserved.


Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.

Email Marketing Powered by Mailchimp