The MORRFlate TenSix™ Has Landed!
|
|
Greetings!! I think I speak for all of us when I say "finally" is an understatement haha. Some of you have been on the waitlist here for upwards of a full year. But the wait will be worth it! They came in a few days early! Product images are made, the new Groovy Gloves are prepped and ready, and TenSixes are waiting anxiously to go out to their new homes!
If you haven't been following along with the updates, here is a breakdown of changes we have made from our pre-production model (which was the same as all other compressors of this style currently on the market):
- Added a pressure cut off switch (80/120) for dual purpose. It should help keep the compressor from overheating due to airing up 1 tire at a time. It will also make using the compressor as an on board air option, easier. Just cut the alligators off, add an inline fuse/breaker and ring terminals to connect to your battery.
- Lengthened the hose off of the compressor for better heat dissipation
- Remade the filter caps so they are threaded instead of press fit. This makes it so that the compressor can be hardmounted in any direction/orientation.
- Changed the non-standard "Nitto Q" air fitting to a USA-standard, color matched "Universal Coupler" which will accept Industrial, Milton, or Auto 1/4" air fittings.
- Redesigned the entire bag to be thicker and far more durable. Added accessory pockets to the bag.
- Designed and are launching our new "Groovy Gloves" with the TenSix™. These gloves will help protect against hot fittings after inflation, but they are also great for anything else you may use gloves for. The grip on them is insane, The breathability is just as good. 1 set of gloves is included with every compressor purchase.
So, just in case you forgot! Below is all of the details on the TenSix™!
- 10.6 CFM dual cylinder compressor at 0 PSI
- 6.5 CFM at 30 psi
- 150 psi rated
- PSI Cutoff Switch (80psi on, 120psi off)
- 50% duty cycle (30min on, 15min off)
- 12v, 90amps peak, ~50amp running
- 14x7x9" external dimensions
- 70-75 dB noise level from 1ft distance
- Beefy carrying bag with accessory pockets
- Threaded filter caps so the compressor can now be mounted in any direction/orientation
- USA Standard color matched air fitting - "Universal" Coupler (Works with Industrial or Auto fittings 1/4" plugs)
- WARNING: Compressors get hot! Recommended to wear the included MORRFlate Groovy Gloves while disconnecting air fittings.
- Since the TenSix™ is rated for 10.6 CFM, it is highly recommended to use with a MORRFlate Multi Tire Inflation & Deflation Kit to avoid back pressures on the compressor from filling 1 tire at a time.
|
|
This email is only going out to the 100 people on the waitlist. We only got in 100 units for this batch. So, you are limited to 1 compressor purchase per person.
You will have until midnight on 4/10 to place your orders before we open up the ordering to the backup waitlist, and the general public.
If we talked about something special such as doing a bundle price with a kit, then place your order with the kit and then reply to the order confirmation email explaining the deal, and we will refund your order for the deal amount. Sorry this part is going to be a little complicated... creating the order sheets for all 100 orders manually would have taken way more time and emails back and forth rather than just doing it this way.
Place your orders by clicking the button below. KEEP IN MIND that we do not have the below URL publicly available ANYWHERE. So if you leave that web page, you will need to come back to this email and click the button in order to find your way back to the order page. AKA, make sure you add the TenSix to your cart before navigating away from the product page!
Please reply to this email if you have any questions and we will get everything sorted out! Thank you everyone for your patience!!
|
|
|
|
