View this email in your browser

KTM

Microbubble Generator

Nikuni has developed a unique and compact Micro-Bubble Generator - the KTM - that creates pressurized air-enriched whitewater with highly reliable performance, insuring excellent stability in processes and systems such as DAF units in water treatment plants.

Features :

1. Three Functions in One Pump
- The KTM simultaneously draws in air and water, dissolves air with its turbine impeller, and pumps pressurized water to the flotation tank or other process

2. Highly Efficient Air and water Dissolution
- Precision turbine pump technology and a unique design make possible extremely high levels of efficiency in dissolving air into water

3. Simple Operation & Stable Performance
- The multifunctional KTM eliminates the need for ancillary equipment such as air compressors, large saturation tanks with difficult level control, and truly simplifies DAF systems and their operation

4. Compact and Small Footprint
- Easily retrofit or upgrade existing DAF systems

5. Minimal Power Use & Maintenance Cost
- Highly efficient process with small pump and motor, no compressor power required, while the simple and robust structure of the KTM minimizes maintenance cost

Learn More

VDF

Cyclonic Filtration

The Vortex Dynamic Filter is a media free coolant filtration system which achieves filtration through centrifugal force eliminating the need for disposable paper or cartridge filters

Features :

1. Maintenance-free operation with no resulting of industrial waste
- Running costs can be reduced significantly due to the operation which requires neither filter nor disposal of industrial waste.

2. Highly efficient, precision filtration
- Precision turbine pump technology and a unique design make possible extremely high levels of efficiency in dissolving air into water.

3. Sludge disposal made easier by concentration of contaminated fluid
- Contaminated fluid and sludge are concentrated in the optional sludge pod to
facilitate subsequent disposal.

4. Wide range of sizes and solutions
- Single unit sizes range between 10 to 300 (1000) L/min.

5. Stainless steel and Nylon made models are available

6. Filtering ferrous and non-ferrous materials

7. Cleaner coolant, reduce scratches or damage resulting improvement of NG rates

8. No foam or bubbles are produced by trapped air

Learn More

UNIVAS

Vacuum Pump System

Nikuni offers the unified vacuum system - UNIVAS, complete with a vacuum pump, seal water tank, and silencer separator, to minimize the overall system size, save installation footprint, and replace existing vacuum systems.

Learn More

OEM Pumps

Regenerative Turbine Pumps for OEM Applications

G Series - Multiplie Configuration Model

Features :

1. Available in three versions; GNLC- motor bracket model, GNL – Mono-block model, GNLM – Seal-less magnetic drive model for optimum selection.

2. The impeller is fixed to the pump shaft to prevent wear due to the contact with other parts to maintain excellent performance over a long pump lifetime (GNLC/GNL).

3. Comes standard with stainless pump material (all) and a SiC × Carbon × FKM mechanical seal for strong chemical and heat resistance (GNLC/GNL).

4. Compact pump head for a most efficient fit. The design allows for smaller motor size and power consumption, reducing overall equipment costs.

5. Easy to assemble without the need for special tools thanks to the simple construction.

6. Due to the symmetrical structure, the pump can be operated in both forward and reverse directions. Multiple discharge port positions can be provided, allowing for easy retrofit into existing equipment, or easy changes in the flow path in and out of pumps.

ON Series - OEM Customizable Model

Features :

1. Mainly designed for OEM applications where customization to water-path design based on customer requirements to achieve the highest efficiency among general regenerative turbine pump technologies.

2. Precisely machined components are assembled with a special high precision custom built motor for mono-block models.

3. Configuration of the motor-bracket type allows the pump to be fixed with a NEMA or other type of motors such as TEF, ODP, washdown, or explosion-proof type.

4. Impeller is fixed to the pump shaft to prevent wear due to contact with other parts to maintain excellent performance over a long pump lifetime.

Learn More